Discussion on the use and maintenance of silicone molds by liquid silicone product manufacturers
Published on: 2023-10-19
1. The manufacturer of liquid silicone products recommends that after the first and every use, clean with hot water (diluted food detergent) or put it in a dishwasher. Do not use abrasive cleaners or foam for cleaning. Ensure that the silicone cup is thoroughly dried before each use and storage.
2. When baking, the silicone cup should be opened separately on a flat baking plate. Do not let the mold dry bake, for example, for a six in one mold, you only have three molds filled, and the other three molds must be filled with water. Otherwise, the mold will burn out and its service life will be reduced. To achieve the best baking effect of the baked product, a small amount of anti stick baking pan oil can be lightly sprayed on the surface of the silicone cup before baking.
3. The silicone cup can withstand heat up to 500 degrees Fahrenheit (260 degrees Celsius) and can withstand instantaneous temperature changes, such as moving the baking cup directly from the refrigerator to the oven.
4. The manufacturer of liquid silicone products explained that when the baking is completed, please remove the entire baking tray from the oven and place the baking product on a rack to be cooled until completely cooled.
5. The silicon calibration cup can only be used for ovens, and must not be directly used on gas or electricity in ovens or microwaves, or directly above the heating plate or below the grill.
6. Do not use knives or other sharp tools on the silicone cup, and do not press, pull, or use violence against each other.
7. The manufacturer of liquid silicone products explained that silicone molds (due to static electricity) are easy to absorb dust. When not in use for a long time, it is best to place them in a paper box and a cool place.
