A Brief Discussion on the Matters of Silicone Product Process for Silicone Phone Case Manufacturers

Published on: 2023-10-19

1. Clean the area of silicone rubber miscellaneous parts that require double-sided adhesive with white electric oil or toluene<oil and water stains.
2. Add diluent in proportion and stir evenly for use.
Note: Silicone and rubber have different material properties.
Silicone miscellaneous parts should be treated with silicone treatment agent, and rubber buttons should be treated with rubber treatment agent. The two should not be mixed or misused, otherwise it will cause peeling after applying double-sided adhesive.
3. Apply the treatment agent evenly to the area where the adhesive backing is required on the silicone rubber miscellaneous parts. After applying evenly, place the silicone rubber miscellaneous parts in a cool and ventilated place and let the treatment agent dry naturally.
4. After the processor on the silicone rubber miscellaneous parts is naturally air dried, apply double-sided adhesive to the area where double-sided adhesive needs to be applied on the silicone rubber miscellaneous parts.
5. The silicone miscellaneous parts have been tightly bonded to the double-sided adhesive.
When it comes to bonding silicone products, it is important to distinguish between the material properties of silicone and rubber, and to keep the double-sided adhesive area clean so that the bonded silicone parts are not easily detached.

Previous:Production process of liquid silicone bracelet Next:Silicone used in industrial production can be divided into several categories

Latest information